• No.2 A20 Zhenhuaxi Road,
  • Lunjiao Shunde Foshan City Guandong China.
  • Working Hours
  • Mon – Sat Day: 09.00 To 18.00
wehomachinery
Trouble with the wood saw | Wood Panel Saw

Trouble with the wood saw | Wood Panel Saw

03 Dec 2021

1. When the wood saw is refueling and stalling, working less vigorously, and the heating machine is overheated, it is generally a filter problem. Therefore, the filter should be inspected before work. A clean and qualified filter should be pointed at the sun to observe it. It should be thorough and bright. Otherwise, it is unqualified. When the filter of the chain saw is not clean enough, it should be washed with hot soapy water and dried. Only a clean filter can ensure the normal use of the chain saw.

2. When the saw teeth of the plank saw become unsharp, you can use a special file to trim the teeth of the saw tooth chain to ensure the sharpness of the saw teeth. At this time, it should be noted that when using a file to frustrate, you must frustrate in the direction of the cutting tooth, not the other way around. At the same time, the angle between the file and the wood saw chain should not be too large, preferably 30 degrees.

3. Before using the wood saw, the wood saw chain oil should be added. The advantage of this is that it can provide lubrication for the wood saw, reduce the friction heat between the wood saw chain and the wood saw guide plate, and protect the guide plate. It can also protect the wood saw chain to avoid premature scrapping.

4. After the plank saw is used, the plank saw should be maintained, so that the work efficiency can be guaranteed when the plank saw is used next time. The first is to remove impurities in the oil inlet hole and the guide plate groove at the root of the wood saw's guide plate to ensure the smoothness of the oil inlet hole.
Wood Panel Saw