• Building 3 Shunheli Industrial Park,
  • Lunjiao Shunde Foshan City Guandong China.
  • Working Hours
  • Mon – Sat Day: 09.00 To 18.00
Introduction of Woodworking Thicknesser Planer

Introduction of Woodworking Thicknesser Planer

19 Aug 2021

A woodworking machine that uses a rotating or fixed planer to process the plane or forming surface of wood. According to different technological uses, woodworking planers can be divided into flat planers, single-sided press planers, double-sided press planers, double-sided planers, three-sided planers, four-sided planers, and finish planers.
   Woodworking Planer is used to plan a datum plane or two orthogonal planes of the workpiece. The electric motor drives the planer shaft to rotate at a high speed through the belt, and the workpiece is pressed by the hand to feed the planer shaft along the guide plate close to the front worktable. The front worktable is lower than the rear worktable, and the height is adjustable. The height difference is the thickness of the planing layer. Adjusting the guide plate can change the processing width and angle of the workpiece. The structure of the joint planer is similar to that of the flat planer, but the machining accuracy is higher. The flat planer is mainly used for the processing of the spliced ​​surface of the board.

 Woodworking press planer is used to plan boards and squares to obtain precise thickness. The planer shaft of the single-sided woodworking press planer makes a rotating cutting motion, and the four rollers located above and below the wood make the wood feed motion and pass the knife shaft along the worktable. The double-sided woodworking planer is processed by two cutter shafts at the same time. According to the different arrangement of the cutter shafts, it can plan the opposite or two adjacent surfaces of the workpiece. The three-sided wood planer uses three spindles to simultaneously plan the three sides of the workpiece. The four-sided wood planer uses 4 to 8 cutter shafts to plan the four sides of the workpiece at the same time. The productivity is high and it is suitable for mass production.
The fixed planing blade of the woodworking planer is installed in the middle of the workbench. The sheet material is driven by the seamless belt to pass through the tool at high speed to scrape away the wave-shaped knife marks left by the previous process to make it smooth and straight. The precision planer is suitable for wood. Final finishing of the plane.
We provide  Woodworking Thicknesser Planer products. If you are interested in  Woodworking Thicknesser Planer, please contact us for more information.